How to Find Hidden Piping and Valves
It is important that you know the details of your home like the back of your hand in case you are a homeowner. One of the things that is especially critical is finding hidden water as well as gas piping and valves and it is important to know where they are especially if you have to deal with things like an emergency. Some of the ways that you can be able to find out where the various shut off valves are located are briefly highlighted below.
There is a high probability that the the gas valves for your home will be located before the gas meter in case you have natural gas. For the most part, most of the nubs are usually rectangular in shape and are opened using a wrench but most gas companies usually recommend that you do not touch them. There is however a side valve that is usually located where the gas pipe first enters or much further down the line.
If you have a gas pipe then the valve will most likely be located in the utility room and will be made from flexible copper. If you find such a piping in your home then you are sure that you have a really high pressure gas system. Such gas systems usually have the shutoff valve near the water heater or the furnace.
There is a high chance that water valves usually have two shut off valves since one is located before the meter and the other located after the meter. Cold environments usually have the shut off points located in the house so that they do not freeze. There is a high chance that if you live in milder climates, then the water shutoff valve will be located in an underground box with a lid or next to an exterior wall.
Take time to look at property reports if you are finding it hard to locate water shut off valve since they are usually indicated in property reports given in the last phase of the property purchase. It is important to look keenly at the report since it will show you where the valve is located. There is also a high probability that the picture of what the valve looks like will be drawn so that you are able to know what it looks like.
With most automatic sprinklers located underground, there is a very high chance that they may be a little bit harder to find. Since such valves usually have metals then you can easily find them by using a metal detector. Even though such valves may not be located exactly where the plans says using the plans is something that will definitely help you to find out where you need to start.